You are here: Home > Windows & Doors

Welcome to our range of Dynamight products

Please go to our Dynamight-Internom website to see our full range of windows and doors.


Orientation

In order to be able to optimize the power of the sun, you should plan your windows to face mainly south, west or east. Large window surfaces facing south create a good energy balance and bring light and life into your rooms. To avoid overheating in the rooms, you should consider sun protection in the planning stage. You can also integrate insect protection systems.

Saving energy

Our homes have been described as our third skin. We spend more than 90% of our lives in closed rooms. Physical comfort and a healthy room temperature are important for our well-being.
Windows are the main factor in determining heating comfort. They represent a substantial "feel-good factor", greatly influencing room temperature and energy balance. The innovative window structures from Internorm are, therefore, the ideal solution not only for passive houses, but also for older buildings and new build of all kinds. And the good news is: thanks to Internorm's windows technology you don't need to compromise on imaginative windows solutions.



Optimal room temperature with triple heat-conserving glass

The high-level insulation properties of triple heat-conserving glazing in comparison to double glazing means that you can have a 40% greater area of glass and still keep your heating bills the same.

Internorm's energy-efficient windows ensure optimal room temperature all year around:
Warm surfaces feel comfortable. This is where the feel-good factor in Internorm windows with their triple heat-conserving glazing comes into its own. The excellent insulation properties keep the temperature of the frame and glazed area close to room temperature so the usual cold layer disappears. On the window itself a comfort-zone is established, providing the right ambience for well-being.

Heat insulation

Because 25% of the energy in a house is lost through the windows, insulation of the windows is particularly important.
The transfer of energy through the windows consists not only of heat-loss but also, due to the transparency of glass, of energy gain. With suitable planning the window areas can be arranged (large areas facing south) so that they influence the energy balance of the building and heating costs are reduced.

The heat insulation of windows depends upon frame materials, insulated glass and the efficiency of the window seal.

           

25% of the energy of a house is           Higher comfort factor, lower heating        Windows are the main factor determining
lost through its windows. With              costs enjoy and save with - Internorm    thermal comfort.
energy-saving windows from
Internorm, this loss can be
minimized.


Noise insulation

The effects of noise can be unpleasant and noise of a particular intensity and duration can have a negative effect on the human organism. We perceive sound because of changes in air pressure which are received by the ear and transmitted to the brain.

The sound insulation of a window is measured in decibels (dB). The higher the number, the better the insulation. The sound insulation of the window depends on the frame material, insulating glass, window sealing and bonding to the building.

       


Sound insulation is mesured in      Children in particular should not     Internorm windows give the best
DECIBELS. The higher the               be subjected to high levels of          noise-protection even for buildings on
number, the better the insulation    noise, and need comfortable          streets with high-density traffic.
                                                               living climate for their general         Still the noise stays outside.
                                                               well-being.

Security


   
Basic security:                         WK 1 - Class 1                      WK 2 - Class 2
Mushroom fittings                   resistance: Special              resistance: all-round
and security locks                   impact-resistant areas        special impact areas,
                                                    on all four corners,               lockable handle and
                                                    anti-drill protection,              projectile-resistant
                                                    lockable handle and            glass. (Class P4A).
                                                    reinforced glass.